Soffio Cube Inhaler Accessories

The most important features at a glance:

• high-quality device for inhalation therapy in respiratory diseases.
• It consists of a compressor and a nebulizer.
• produces an active ingredient mist fine enough to achieve very good medical effectiveness down to the regions of the lower respiratory tract.

Soffio Cube Compressor Inhaler Accessories

• 1x Nebulizer
• 1x Mouthpiece
• 1x Adult mask
• 1x Replacement filter (6 pieces)
• 1x Elbow piece (adapter)
• 1x Nasal piece
• 1x Air hose
• 1x Child mask
• 2x Rubber bands for masks.
  

This inhalation device is a high-quality device for inhalation therapy in respiratory diseases. It consists of a compressor and a nebulizer. This therapy device produces a medicated mist fine enough to achieve very good medical efficacy down to the regions of the lower respiratory tract.

No contraindications are known that restrict the use of the inhalation device. 

Filter replacement

Regular replacement of the air filter is necessary to ensure optimal compressor performance.

We therefore recommend regularly checking the filter. Replace it as needed if it is gray, brown, or wet. To do this, you must open the cover of the air filter compartment. Replace the filter only with new original filters. Contaminated filters must be disposed of.

Cleaning and care

Clean all accessories thoroughly after each treatment to remove medication residues and possible contaminants. Unplug the device before cleaning.

Cleaning the compressor

The compressor housing can be cleaned with a soft cloth and mild detergent. Under no circumstances expose the compressor to water or heat.

Cleaning and disinfection of accessories

Always wash your hands thoroughly before cleaning and disinfecting the accessories. Use a new air hose for the treatment of each new patient or in case of contamination.

The air hose can be cleaned with a clean, damp cloth. Wash all inhaler accessories (except the air hose) under warm tap water for about 5 minutes; use some dish soap if necessary and follow the instructions of the dish soap manufacturer. Rinse all parts thoroughly; ensure all residues are washed away and let all parts dry.

The accessories (except masks and air hose) can be cleaned and disinfected by boiling in plenty of water (min. 5 min). Make sure the accessories do not come into contact with the bottom of the pot. Afterwards, let all parts dry thoroughly.

All inhaler accessories (except the air hose) can be disinfected with chemical disinfectants; follow the instructions of the disinfectant manufacturer.

All inhaler accessories (except the air hose and masks) can be sterilized with hot steam; up to 121 °C (20 min.) or up to 134 °C (7 min.). EN554/ISO11134. The sterilization package must comply with EN868/ISO11607 regulations and be suitable for steam sterilization. After sterilization, always allow all accessories to cool to room temperature before reuse. Do not repeat the sterilization process if the accessories are still warm.