Antar Electric Wheelchair AT52305, foldable

Electric Wheelchair AT52305 - Foldable

The electric wheelchair AT52305 has been specifically designed for people with limited mobility and disabilities who want to actively participate in daily life. This foldable wheelchair not only offers outstanding mobility but also comfort and safety in a compact and lightweight design.

Technical data:

• Dimensions in the unfolded state: 950 x 625 x 930 mm (Length x Width x Depth)
• Dimensions after folding: 410 x 625 x 775 mm
• Net weight: 21 kg
• Actual seat depth: 400 mm
• Seat width: 430 mm
• Height of the backrest: 460 mm
• Width of the backrest: 400 mm
• Distance from the footrest to the seat: 465 mm
• Distance from the footrest to the floor: 90 mm
• Maximum speed: ≤ 4.5 km/h
• Maximum user weight: 100 kg
• Batterie: 24V 6Ah*1
• Range: 10 km
• Motor specifications: 24V 150W*2
• Front wheel: Non-pneumatic tire, outer diameter 150 mm
• Rear wheel: Non-pneumatic tire, outer diameter 270 mm
• EAN: 5901571481043

Properties of the electric wheelchair:

• Classification according to the type of protective device against electric shock: the wheelchair is connected to an internal power supply.
• Classification according to the level of protection against electric shock: the wheelchair belongs to application part Type B.
• IPX0 classified according to the level of protection against the ingress of liquid.
• Classification of the safety level of a flammable anesthetic gas mixed with air or oxygen or nitrous oxide: other devices than AP or APG.
• Classification according to the mode of operation: Continuous operation.
• Rated voltage and frequency of the wheelchair: Direct current (DC) 24 V.
• Energy supply of the wheelchair: integrated system for energy supply.
• The wheelchair is not equipped with a protective device against discharges.
• The wheelchair has no signal output and input elements.
• The device is suitable for permanent or temporary installation: mobile device.

Usage and Operation

• The control unit is integrated into the armrest and connected to the electrical box, motor, and accumulator.
• The power switch enables the power supply to the control system, which transmits the energy to the motor.
• The wheelchair should not be brought to a stop with the power switch unless it is an emergency situation.
• The control unit enables the control of direction and speed of the wheelchair.
• A tilt of the control unit from the inside accelerates the wheelchair, while a movement in the opposite direction slows down the movement.
• An automatic return to the starting position and a braking process occur when the control device is released.
• The signal tone button produces an audible warning tone.
• The speed reduction button and acceleration button allow for the adjustment of driving speed.

Note: The charging socket is exclusively intended for charging the wheelchair and must not be used as a power source for other electrical devices to avoid damage or impairment of the wheelchair's efficiency.

Instructions for use, etc.

• User manual AT52305 in PDF
• Safety Data Sheet
• THIS LOL